BEST SELLING PRODUCTS
Arcade1up Mortal Kombat Combo Move List Standard Bezel
-
THIS DOES NOT FIT THE COSTCO MK CABINET
- Fitted for Arcade1up cabinet – Horizontal Monitor Only
- Some trimming will be required before and after install
- Features Special Moves/Finishers for all characters across all 3 games
- Top Left is MK1, Left/Bottom Left is MK2. Right is UMK3
- Shang Tsung Morphs are optional pieces that you can put in the top corners of the CPO (Tsung is in the bottom corners of the bezel for that very reason) if you want.
- Designed by: Boltz Designz
Arcade1up Pacman Kickplate
- Fitted for Arcade1up Cabinet
- 2 Piece Set – Kickplate w/ Control Panel Filler
- 1/4″ Bleed Added Trimming Required
- Colors May Vary From Actual Arcade1up Graphics
Arcade1up Mortal Kombat Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Arcade1up Street Fighter 2 CE Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Arcade1up Street Fighter 2 CE Kickplate
- Fitted for Arcade1up Cabinet
- 2 Piece Set – Kickplate w/ Control Panel Filler
- 1/4″ Bleed Added Trimming Required
- Colors May Vary From Actual Arcade1up Graphics
Arcade1up Galaga Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Control Panel Graphics
Our graphics are digitally printed with eco solvent ink on 3mil commercial grade indoor/outdoor sign film. Everything we sell comes laminated with 3mil gloss/matte protective laminate to protect the graphics from scratches and fading. Our graphics not only look bright … Read More
Arcade1up Pacman Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Arcade1up Rampage Kickplate
- Fitted for Arcade1up Cabinet
- 2 Piece Set – Kickplate w/ Control Panel Filler
- 1/4″ Bleed Added Trimming Required
- Colors May Vary From Actual Arcade1up Graphics
Arcade1up Asteriods Kickplate
- Fitted for Arcade1up Cabinet
- 2 Piece Set – Kickplate w/ Control Panel Filler
- 1/4″ Bleed Added Trimming Required
- Colors May Vary From Actual Arcade1up Graphics
Arcade1up Custom Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Please leave a detail note at checkout
for your custom request. Sometimes there are
designs we just can’t do. If thats the case
we will either offer a different design or give
a refund. Complex designs may occur additional design fees.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Arcade1up Centipede Kickplate
- Fitted for Arcade1up Cabinet
- 2 Piece Set – Kickplate w/ Control Panel Filler
- 1/4″ Bleed Added Trimming Required
- Colors May Vary From Actual Arcade1up Graphics
Arcade1up Asteroids Control Panel Overlay
- Replacement for the Arcade1up
- Heavy Duty Wear Proof Laminate
- Slightly over sized so trimming is required
- Colors may vary from oem Arcade1up graphics
Arcade1up Final Fight Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Arcade1up Pacman Pixel Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Stainless Steel Utility Knife
- Stainless Steel Razor
- Snap Off Blade
- Lockable
FEATURED PRODUCTS
Bartop Bubble Bobble Complete Kit
- 18.5″x4″ Marquee
- 18.5″x6″ Top
- 18.5×3″ Speaker
- 18.5″x8″ Control Panel
- 18.5″x4.5″ Front
- 18.5″x19″ Back
- 17.25″x22.75″ Side
- We can custom size to fit your bartop.
- Marquee comes on backlit peel and stick film.
- Control panel comes laminated with wear proof film.
- All pieces come with 1/8″ to 1/4″ of bleed.
Bartop Donkey Kong Complete Kit
- 18.5″x4″ Marquee
- 18.5″x6″ Top
- 18.5×3″ Speaker
- 18.5″x8″ Control Panel
- 18.5″x4.5″ Front
- 18.5″x19″ Back
- 17.25″x22.75″ Side
- We can custom size to fit your bartop.
- Marquee comes on backlit peel and stick film.
- Control panel comes laminated with wear proof film.
- All pieces come with 1/8″ to 1/4″ of bleed.
Neo Geo Red Complete Kit
- 18.5″x4″ Marquee
- 18.5″x6″ Top
- 18.5×3″ Speaker
- 18.5″x8″ Control Panel
- 18.5″x4.5″ Front
- 18.5″x19″ Back
- 17.25″x22.75″ Side
- We can custom size to fit your bartop.
- Marquee comes on backlit peel and stick film.
- Control panel comes laminated with wear proof film.
- All pieces come with 1/8″ to 1/4″ of bleed.
Legends Ultimate Blitz/Showtime Complete Kit
This kit is sized to fit the Legends Ultimate cabinet.
Some trimming will be needed once installed.
Please view our installation videos here. “COMING SOON”
Included:
- Peel & Stick Translight Marquee w/ 1/4″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Control Panel Filler w/ 1/4″ Bleed
- Speaker Panel w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Arcade1up Daytona USA Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Arcade1up Simpsons 4 Player Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- CP Boarder Filler w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Legends Ultimate Custom Control Panel Overlay
Sized to fit the Legends Ultimate cabinet.
Some trimming will be needed once installed.
All buttons are hardware must be removed to install.
Please view our installation videos here. “COMING SOON”
Please leave a detail note at checkout
for your custom request. Sometimes there are
designs we just can’t do. If thats the case
we will either offer a different design or give
a refund. Complex designs may occur additional design fees.
Included:
- Control Panel Overlay w/ 1/4″ Bleed
Toyshock Pinball Haunted House Bezel v3
This kit is sized to fit the ToyShock Pinball.
Some trimming will be needed once installed.
Please view our installation videos “COMING SOON”
Included:
- Bezel w/ 1.5″ Outside Bleed – .25″ Inside Bleed
Arcade1up Splatterhouse Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Legends Ultimate House of the Dead 3 Complete Kit
This kit is sized to fit the Legends Ultimate cabinet.
Some trimming will be needed once installed.
Please view our installation videos here. “COMING SOON”
Included:
- Peel & Stick Translight Marquee w/ 1/4″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Control Panel Filler w/ 1/4″ Bleed
- Speaker Panel w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Arcade1up Total Carnage Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Street Fighter V Complete Kit
- 18.5″x4″ Marquee
- 18.5″x6″ Top
- 18.5×3″ Speaker
- 18.5″x8″ Control Panel
- 18.5″x4.5″ Front
- 18.5″x19″ Back
- 17.25″x22.75″ Side
- We can custom size to fit your bartop.
- Marquee comes on backlit peel and stick film.
- Control panel comes laminated with wear proof film.
- All pieces come with 1/8″ to 1/4″ of bleed.
Street Fighter / Tekken Complete Kit
- 18.5″x4″ Marquee
- 18.5″x6″ Top
- 18.5×3″ Speaker
- 18.5″x8″ Control Panel
- 18.5″x4.5″ Front
- 18.5″x19″ Back
- 17.25″x22.75″ Side
- We can custom size to fit your bartop.
- Marquee comes on backlit peel and stick film.
- Control panel comes laminated with wear proof film.
- All pieces come with 1/8″ to 1/4″ of bleed.
Legends Ultimate Phoenix Complete Kit
This kit is sized to fit the Legends Ultimate cabinet.
Some trimming will be needed once installed.
Please view our installation videos here. “COMING SOON”
Included:
- Peel & Stick Translight Marquee w/ 1/4″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Control Panel Filler w/ 1/4″ Bleed
- Speaker Panel w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Arcade1up Marvel Super Heros Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Arcade1up TMNT Classic Riser
- Sized for Arcade1up Riser
- Notch to be Trimmed After Install
- Colors May Vary From A1U Graphics
- Not an actual Riser, graphics only!!!
Arcade1up The Mandalorian Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
Arcade1up Captain America 4 Player Complete Kit
This kit is sized to fit the Arcade1up cabinet.
Some trimming will be needed once installed.
Please view our installation videos here.
Included:
- Marquee w/ 1/8″ Bleed
- Bezel w/ 1/4″ Bleed
- Control Panel Overlay w/ 1/4″ Bleed
- CP Boarder Filler w/ 1/4″ Bleed
- Kickplate w/ 1/4″ Bleed
- One Pair of Sideart w/ 1″ Bleed
Optional:
- Riser w/ 1/4″ Bleed
ON SALE PRODUCTS
Fade Series Gameroom Banner
Size: 24″x72″
1″ Finish Hem Top & Bottom
Grommet Every 24″
